EDP Sciences logo
All issues Europhys. News, 30 1 (1999) 17-20 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Manufacturing and characterization of open-cell aluminum foam by powder metallurgy

Berkay Menç and Yusuf Özçatalbaş
Materials Science and Technology 42 (1) 93 (2026)
https://doi.org/10.1177/02670836241291267

Topological modeling of metallic foams

Ihab Sabik, Paul Hans Kamm, Francisco García-Moreno and Frank H Lutz
Modelling and Simulation in Materials Science and Engineering 33 (7) 075015 (2025)
https://doi.org/10.1088/1361-651X/ae0c25

Carbon foam for next-generation electrochemical energy storage: advances, challenges, and outlook

Monjur Mourshed, Robel Ahmed, Md.Golam Kibria and Md Rabiul Islam Sarker
Energy Conversion and Management: X 28 101281 (2025)
https://doi.org/10.1016/j.ecmx.2025.101281

Insight into classifications and manufacturing processes of metallic foams: A review

Shashank Kumar Srivastava, Gaurav Kumar Gupta, Tilak Chandra Joshi, Dipen Kumar Rajak, Shruti K J Sanskrita, Dehipada Mondal and Avanish Kumar Srivastava
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023)
https://doi.org/10.1177/09544089231190551

A Review on Different Approaches for Foam Fabrication

Ali Imran Ansari and Nazir Ahmad Sheikh
Journal of The Institution of Engineers (India): Series C 104 (6) 1219 (2023)
https://doi.org/10.1007/s40032-023-00998-x

Characteristics of Porous Aluminium Materials Produced by Pressing Sodium Chloride into Their Melts

Iva Nová, Karel Fraňa, Pavel Solfronk, Jiří Sobotka, David Koreček and Martin Švec
Materials 14 (17) 4809 (2021)
https://doi.org/10.3390/ma14174809

Advances in Computational Methods in Manufacturing

R. Kumar, G. Avinash and Neha Gupta
Lecture Notes on Multidisciplinary Industrial Engineering, Advances in Computational Methods in Manufacturing 439 (2019)
https://doi.org/10.1007/978-981-32-9072-3_38

Drying of Foam under Microgravity Conditions

Nektaria Koursari, Omid Arjmandi-Tash, Anna Trybala and Victor M. Starov
Microgravity Science and Technology 31 (5) 589 (2019)
https://doi.org/10.1007/s12217-019-09715-9

Porosity Control in Aluminium Foams Using Different Additives

G Avinash, V Harika, Ch Sandeepika, Roushan Kumar and Neha Gupta
Materials Today: Proceedings 18 1054 (2019)
https://doi.org/10.1016/j.matpr.2019.06.563

Pore Size Control in Aluminium Foam by Standardizing Bubble Rise Velocity and Melt Viscosity

G Avinash, V Harika, Ch Sandeepika and N Gupta
IOP Conference Series: Materials Science and Engineering 338 012010 (2018)
https://doi.org/10.1088/1757-899X/338/1/012010

Influence of oxides on the stability of zinc foam

Avinash Chethan, Francisco Garcia-Moreno, Nelia Wanderka, B. S. Murty and John Banhart
Journal of Materials Science 46 (24) 7806 (2011)
https://doi.org/10.1007/s10853-011-5761-8

SiC-particulate aluminum composite foams produced by powder compacts: Foaming and compression behavior

S. Elbir, S. Yilmaz, A. K. Toksoy, M. Guden and I. W. Hall
Journal of Materials Science 38 (23) 4745 (2003)
https://doi.org/10.1023/A:1027427102837